Proteas Filter central supply water filters are suitable for installation only the central water supply.
CENTRAL SUPPLY WATER FILTERS
Manual self cleaning filter 1″ & 3/4″ inlet/outlet 30μm
Manual self cleaning filter with inlet/outlet 1″ and also 3/4″ – 30μm
The cleaning of the filter is done manually, by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Characteristics:
• Head material: Brass
• Sump material: PΕΤ
• Inlet/outlet material: Brass
• Diameter inlet/outlet: 3/4”-1”
• O-ring material: NBR
• Working temperature: 2 °C – 35 °C
• Weight: 0,560 Kg
• Dimensions (cm): 23,00 x 15,00 x 6,00
Description
Manual self cleaning filter with inlet/outlet 1″ and also 3/4″ – 30μm
The cleaning of the filter is done manually, by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Additional information
| Weight | 0,45 kg |
|---|---|
| Dimensions | 21 × 9 × 6 cm |
Related products
Manual self cleaning filter 1/2″ inlet/outlet 30μm with scrapper
Manual self cleaning filter with inlet/outlet 1/2″ – 30μm
The cleaning of the filter is done manually, by rotating the blue ring which rotates the plastic scrapper around the stainless steel mesh and by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Characteristics:
• Ηead material: Brass
• Sump material: PΕΤ
• Inlet/outlet material: Brass
• Diameter inlet/outlet: 3/4”-1”
• O-ring material: NBR
• Working temperature: 2 °C – 35 °C
• Weight: 0,660 Kg
• Dimensions (cm): 21,00 x 9,00 x 6,00
Description
Manual self cleaning filter with inlet/outlet 1/2″ – 30μm
The cleaning of the filter is done manually, by rotating the blue ring which rotates the plastic scrapper around the stainless steel mesh and by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Additional information
| Weight | 0,45 kg |
|---|---|
| Dimensions | 21 × 9 × 6 cm |
Related products
Manual self cleaning filter 1/2″ inlet/outlet 30μm with scrapper
Manual self cleaning filter with inlet/outlet 1/2″ – 30μm
The cleaning of the filter is done manually, by rotating the blue ring which rotates the plastic scrapper around the stainless steel mesh and by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Characteristics:
• Ηead material: Brass
• Sump material: PΕΤ
• Inlet/outlet material: Brass
• Diameter inlet/outlet: 3/4”-1”
• O-ring material: NBR
• Working temperature: 2 °C – 35 °C
• Weight: 0,660 Kg
• Dimensions (cm): 21,00 x 9,00 x 6,00
Description
Manual self cleaning filter with inlet/outlet 1/2″ – 30μm
The cleaning of the filter is done manually, by rotating the blue ring which rotates the plastic scrapper around the stainless steel mesh and by opening the drain valve that is installed in the bottom side. Also, you can remove the stainless steel mesh so as to clean it under water by scrubing it with a sponge or a toothbrush. Removes solid particles and sediments (sand, mud, rust, silt) up to 30μm.
It is eqquiped with drain valve and a wrench.
Additional information
| Weight | 0,45 kg |
|---|---|
| Dimensions | 21 × 9 × 6 cm |
Related products
Main water supply filter triple Big Blue 20”
Triple water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Characteristics
• Cap material: PP (Polypropylene)
• Housing material: PP (Polypropylene)
• Inlet/Outlet material: Brass/plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weigth: 17,700 Kg
• Dimensions (HxLxW) cm: 73,00 x 57,00 x 23,50
Description
Triple water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Additional information
| Weight | 17,7 kg |
|---|---|
| Dimensions | 73 × 57 × 23,50 cm |
Related products
Main water supply filter triple Big Blue 10”
Triple water filter Big Blue 10” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Characteristics
• Cap material: PP (Polypropylene)
• Housing material: PP (Polypropylene)
• Inlet/Outlet material: Brass/plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weigth: 13,200Kg
• Dimensions (HxLxW) cm: 73,00 x 57,00 x 23,50
Description
Triple water filter Big Blue 10” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Additional information
| Weight | 13,2 kg |
|---|---|
| Dimensions | 53 × 57 × 23,5 cm |
Related products
Main water supply filter double Big Blue 20”
Double water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Characteristics:
• Cap material: PP (Polypropylene)
• Hosuing material: PP (Polypropylene)
• Inlet/Outlet material: Brass/Plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 11,800 Kg
• Dimensions (HxLxW) cm: 73,00 x 38,00 x 23,50
Description
Double water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Additional information
| Weight | 11,8 kg |
|---|---|
| Dimensions | 73 × 38 × 23,50 cm |
Related products
Main water supply filter double Big Blue 10”
PFBB2-BR10-1, PFBB2-PL10-15
Double water filter Big Blue 10” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Characteristics:
• Cap material: PP (Polypropylene)
• Housing material: PP (Polypropelene)
• Inlet/Outlet material: Brass/Plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Inlet/Outlet: 1/2”, 3/4”, 1”
• Working temperature: 2 °C – 35 °C
• Weigth: 3,500 Kg
• Dimensions (HxLxW) cm: 53,00 x 38,00 x 23,50
Description
Double water filter Big Blue 10” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Additional information
| Weight | 3,5 kg |
|---|---|
| Dimensions | 60 × 18,5 cm |
Related products
Main water supply filter Big Blue 20”
Single water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Characteristics:
• Cap material: PP (Polypropylene)
• Hosuing material: PP (Polypropylene)
• Inlet/Outlet material: Brass/Plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 3,500 Kg
• Dimensions (HxD) cm: 60,00 x 18,50
Description
Single water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 20”.
Additional information
| Weight | 3,5 kg |
|---|---|
| Dimensions | 60 × 18,5 cm |
Related products
Main water supply filter Big Blue 10”
Single water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Characteristics:
• Cap material: PP (Polypropylene)
• Hosuing material: PP (Polypropylene)
• Inlet/Outlet material: Brass/Plastic
• Diameter inlet/outlet: 1”, 1,5”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 3,500 Kg
• Dimensions (HxD) cm: 60,00 x 18,50
Description
Single water filter Big Blue 20” Proteas is suitable for installation in the central water supply. It is compatible with filter cartridges Big Blue 10”.
Additional information
| Weight | 1,55 kg |
|---|---|
| Dimensions | 34 × 18,5 cm |
Related products
Main water supply filter double 5”
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 5”.
Characteristics
• Cap material: PP (Polypropylene)
• Housing material: PΕΤ (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Diameter inlet/outlet: 1/2”, 3/4”, 1”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 1,550 Kg
• Dimensions (HxLxW) cm: 19,00 x 27,50 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 5”.
Additional information
| Weight | 1,55 kg |
|---|---|
| Dimensions | 19 × 27,5 cm |
Related products
Main water supply filter double 7”
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 7”.
Characteristics
• Cap material: PP (Polypropylene)
• Housing material: PΕΤ (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Diameter inlet/outlet: 1/2”, 3/4”, 1”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 1,650 Kg
• Dimensions (HxLxW) cm: 24,00 x 27,50 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 7”.
Additional information
| Weight | 1,65 kg |
|---|---|
| Dimensions | 24 × 27,5 cm |
Related products
Main water supply filter double 10”
PFCS2-BR10-12, PFCS2-BR10-34, PFCS2-BR10-1
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 10”.
Characteristics
• Cap material: PP (Polypropylene)
• Housing material: PΕΤ (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Diameter inlet/outlet: 1/2”, 3/4”, 1”
• O-ring material: NBR (Nitrile Rubber)
• Working temperature: 2 °C – 35 °C
• Weight: 1,850 Kg
• Dimensions (HxLxW) cm: 32,00 x 27,50 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 10”.
Additional information
| Weight | 1,85 kg |
|---|---|
| Dimensions | 32 × 27 cm |
Related products
Main water supply filter single 5”
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 5”.
Characteristics:
• Cap material: PP (Polypropylene)
• Housing material: PET (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Inlet/Outlet size: 1/2”, 3/4”, 1”
• O-Ring: NBR (Nitrile Rubber)
• Maximum working pressure: 22bar
• maximum working temprature: 2 °C – 35 °C
• Weight: 0,500Kg
• Dimensions (HxD) cm: 19,00 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 5”.
Additional information
| Weight | 0,500 kg |
|---|---|
| Dimensions | 19 × 13 cm |
Related products
Main water supply filter single 7”
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 7”.
Characteristics:
• Cap material: PP (Polypropylene)
• Housing material: PET (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Inlet/Outlet size: 1/2”, 3/4”, 1”
• O-Ring: NBR (Nitrile Rubber)
• Maximum working pressure: 20bar
• maximum working temprature: 2 °C – 35 °C
• Weight: 0,740Kg
• Dimensions (HxD) cm: 24,00 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 7”.
Additional information
| Weight | 0,740 kg |
|---|---|
| Dimensions | 24 × 13 cm |
Related products
Main water supply filter single 10”
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 10”.
Characteristics:
• Cap material: PP (Polypropylene)
• Housing material: PET (Polyethylene Terephthalate)
• Inlet/Outlet material: Brass
• Inlet/Outlet size: 1/2”, 3/4”, 1”
• O-Ring: NBR (Nitrile Rubber)
• Maximum working pressure: 18bar
• maximum working temprature: 2 °C – 35 °C
• Weight: 0,840Kg
• Dimensions (HxD) cm: 32,00 x 13,00
Description
Proteas water filter is suitable for installation only in the central water supply. It is compatible with filter cartridges 10”.
Additional information
| Weight | 0,840 kg |
|---|---|
| Dimensions | 32 × 13 cm |